Colour:Set of 2 High load-bearing capacity thanks to dowels & double-sided adhesive tape suspensions each with 1 adhesive plate (self-adhesive over the entire surface) and 1 wall hook together carry a maximum weight of 3 kg. A set of 2 brackets works for pictures & Mirror up to 6 kg weight. A set of 6 mounts works for pictures & Mirror up to 18 kg weight. Get started straight away thanks to the complete mounting kit. All you need is a cordless drill for wall mounting. This is simple & Quickly in 6 steps: 1. Use the supplied cleaning cloth to keep the back of the picture or mirror dust-free 2. Simply remove the protective film from the adhesive surface of the metal plates and stick the adhesive plates on the back of the picture at the same height. 3. Glue the foam spacer to the bottom of the picture at the back. 4. Drill wall holes at the same height and insert the supplied dowels into the drill hole. 5. Screw height-adjustable wall hooks into the drill holes. 6. Hang the picture or mirror on the wall hook from above and straighten it using the spirit level provided. To adjust the height, simply loosen the screws on the hooks and adjust the height of the hooks perfectly. Advantages of this picture hanger: easy and safe installation thanks to the included spirit level, cleaning cloth and adhesive surfaces for peeling off perfect alignment of the picture thanks to height-adjustable wall hooks high load-bearing capacity of 6 to 18 kg thanks to dowels with matching screws perfect distance to the wall thanks to foam spacers unobtrusive Suspension does not distract from the image