The use of high-speed microprocessor chips with higher computing speed and larger capacity allows the entire system to achieve higher performance.It integrates professional-grade receiving modules with two standard frequencies of 315Mhz and 433Mhz, dual-band standby, and automatic and seamless switching.Receiving sensitivity: better than -110dbm, distance is 0-50 meters, but the specific distance also depends on the actual application conditions and environment. Transmitting power: 16dBm (40mW), distance is 0-50 meters, but the specific distance also depends on the actual application conditions and environment.Automatically identify the type of encoding chip for remote control equipment. There are two main types of encoding chips on the market: Fixed code: PT2262, PT2264, HX2262, LX2262, SC2260, SC2262, CS5211, Learning code: eV1527, SCL1527, PT2240, RT1527, FP527, HS527 Automatically decode the frequency used by the remote control device and various related parameters of the encoding chip. (Including chip model, oscillation resistance value used, address code, data data).The collected data is automatically saved, and there is 50 sets of super-large capacity data recording space, and the data will not be lost even if the power is cut off. Added full data editing function. You can freely edit the types of supported chips and all parameters of the corresponding chips. This is equivalent to adjusting the machine to become a universal remote control for the supported chips, and the data edited above can be saved in the corresponding group number and can be adjusted at any time. Come out and use it. It retains the function of simply editing key data in the search state, which can realize three-state switching of key positions (i.e.: 0, 1, F), and also adds the function of jog launch and long press launch that can simulate the actual application of the r