1. Color: Silver; 2. Solar reflectance: 76%; 3. UV reflectance: 98%; 4. Thickness: 42 microns; 5. Visible light transmittance: 10%. 6. If you have the following needs, the Silver 05 mirror film will be your ideal choice: - Protect the indoor space from intense sunlight or overheating; - Make your home or office decoration more original - the film can produce a mirror effect; - Change the interior decoration - the Silver 05 film can be pasted on office partitions, doors, or glass furniture elements; - Create the effect of privacy and one - way visibility to avoid prying. 7. When purchasing the Silver 05 film from Allstars Windows Film, you can be sure that the time - tested product has excellent quality. 8. To paste the film, you need the following tools: - Sprayer; - Rubber squeegee; - Putty knife; - Scraper; - Sharp knife for cutting the film. 9. Professionals use special tools, but if you want to cover one or two windows with sun - protection film, you can use a temporary method. 10. Applying sun - protection film at home: - Measure the size of the glass. - Cut the film according to the size of the window, leaving an extra 1 - 2 cm at the top and sides. - Clean the window with soapy water, a rubber squeegee, and a putty knife. The blade can be removed from a construction knife and can also be used to cut the film after it is stuck to the window. - Apply the soap solution to the clean window again. - Tear off the protective layer of the film with the help of two pieces of tape stuck to one corner of the protective film. Spray the adhesive layer with soapy water when removing the protective layer to prevent dust from entering. - Place the film on the glass and smooth its edges. Then, use a rubber squeegee to squeeze out the water and air bubbles from the middle to the edges. - Cut the edges with a sharp knife and squeeze out the remaining water. 11. It is recommended not to open the window within 12 hours after pasting the sun - protection film.