Main feature of ZED BULL: Finding PIN Code, preparing precoded transponders and programming transponders from EEPROM and MCU. Zed-BULL PC software's excellent features will help you while using EEPROM applications. ECU pictures, which ECU has which MCU or EEPROM and the location of mcu or eeprom on the board, which type transponder will be used... With Automatic Module Finding (AMF) feature, when you select the EEPROM file, the module will be recognized automatically Another revolution of Zed-BULL is programing transponders when there is no key from ECUs. For now, Zed-BULL has 55 different applications and it is increasing... With this feature, you can program transponders, find pin codes and prepare precoded transponders for the cars which need precoded transponders like for fiat doblo 48. For this feature, you don't need expensive precoded transponders priced about 8-10 Euro. You can use blank transponders. Transponder Cloning: 11, 12, 13, 33, 73, 4C (writing to 4C electronic key and batteryless TPX1 transponder), for Crypto 40 (some), 41(all), 42(all), 44(all unlocked VAG), 45(all), Texas crypto 4D(all 60-61-62-63-64-65-67)to batteryless TPX2 andfor for Silca electronic heads Until now, common transponder cloning tools could only copy fixed transponders. But the revolution that we started with our device, Zed-Qx, is increasing with Zed-BULL. 41(for NISSAN), 42(for VAG), 44(Unlocked for VAG) and 45(for PEUGEOT) transponders which normally known as can not be copied, can be copied with Zed-BULL. Also you can copy 4C transponders onto batteryless TPX1 4C glass transponders Producing Transponders for OBD Programing: If you have an OBD device like T-Code Pro, you will need special precoded transponders for some cars. Instead of buying these special transponders for high prices, you can produce them with Zed-BULL using blank transponders. The transponders that you can produce: 40, 41, 42, 44, 45, 73 for Mitsubishi, 44 for VAG, 61, 62, 65 and