1. Adopting the FT232RNL+SP485EEN chip scheme, high-speed communication is stable, and compatible2. On-board (transient voltage suppression tube) can effectively suppress the surge voltage and transient voltage in the circuit, and prevent- and static electricity3. The on-board self- fuse and protection diode can the stable output of current and voltage, prevent over-current and over-voltage, and the impact resistance4. Onboard 15KV ESD isolation protection and 600W -surge protection. 120R terminal resistance of on-board RS485/RS422 interface, enabled by default, can be modified through jumper cap settingProduct type: industrial isolated USB to RS485/422 converter; Communication rate: FT232RNL 300bps~3Mbps; interface: USB; Equipment interface: RS485/422USB interface:Working level: 5VInterface type: USB-B interfaceInterface protection: 200mA self- fuse, ESD static protectionTransmission distance: about 5 RS485/422 interface:Interface type: terminal blockInterface pins: A+, B -, PEDirection control: the hardware automatically determines and controls the data transmission directionInterface protection: 600W -protection, surge and 15KV static electricity protection (onboard 120R balance resistance)Transmission distance: about 1200 (at low speed)Transmission mode: point-to-many, (up to 32 nodes, and repeaters are recommended for more than 16 nodes)indicator light:PWR: power indicator, connected to USB, red light when voltage is detectedTXD: send indicator light, green light when data is sent from USB portRXD: receiving indicator light, blue light when data is sent back from the device interfaceUse environment:Temperature range: -15 ~70 Humidity range: 5% RH~95% RH: , Linux, Android, WinCE, /8.1/8/7/XPHousing: guide-type ABS environment-friendly housing, suitable for 35mm DIN railSize: 81.9 x 54 x 32mmcolor:BlackMaterial:ABS+metalPackage Contents:1 x USB TO RS485/422 converter1 x USB cable type A male to type B male, about 1.2m1 x screwdriverOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.