The reversing kit consists of a 7" monitor and a stop light equipped with a reversing camera. REVERSING SET FOR: OPEL VIVARO 2001-2014 RENAULT HIT 2001-2014 NISSAN PRIMASTAR 2001-2014 COMBO 2001 - 2011 (versions with flap) KAMERA and MONITOR IN MIRROR 7" The parking set is an irreplaceable help when driving on crowded city streets and parking using the "contact" method as well as when reversing in unlit terrain, in heavy rain, with a frozen rear window and in many other road situations. They can also prevent a pedestrian, cyclist or animal running behind our car from being hit. The car kamera for mounting in place of the third stop light provides excellent visibility when reversing additionally the night vision system improves the image quality at night. The large viewing angle of 170° allows you to see objects in a field invisible to the rear-view mirror. After installing the kamera, it starts every time we turn on the reverse gear, because the power cord is connected to the reversing light. Easy connection Non-invasive and very simple camera installation - does not require any modifications. Simply remove the middle factory STOP light and install the camera module in its place, solder the power cables to the original cube supplying the brake light earlier, and guide the video cable to the monitor. The included 10-meter wiring kit allows you to quickly and comfortably connect the camera to any monitor equipped with a standard video input (RCA / cinch). After installation, the system starts every time we turn on the reverse gear, because the power cord is connected to the reversing light. KAMERA MOUNTED IN PLACE OF LIGHT STOP - CONVENIENCE OF INSTALLATION - camera housing equipped with LEDs - connected to the original factory connector! CAMERA MODEL WITH ADJUSTABLE ANGLE AND IR LEDS Kamera has a degree of protection IP68, which means that it is not afraid of any weather and will easily meet the conditions prevailing on Polish roads. Technical data of the reversing camera in the STOP lamp Transducer: 1/3" CMOS System: NTSC Horizontal resolution n420TVL Effective pixels: 510 x 492 Sensitivity: 0,4lux/F1.2 Signal/Noise Ratio: andgt;48dB Gain Control: AGC Rear Light Compensation: BLC Shutter speed: n1/50-1/100000s Mirror function: Picture seen as in the rearview mirror Length of camera power cord: 1,5m Degree of protection IP: IP67 Video output: 1.0Vp-p,75 ohm 1.0Vp-p,75 ohm Power Supply: 12V Current Consumption: 130-150mA Temp. Operation: -20 to and75°C Temp. Storage: -30 to and85°C Material Polycarbonate Enclosures Video cable 10m REAR-VIEW MIRROR WITH 7" MONITOR Monitor built into the mirror with touch panel, and two Video outputs. The equipment is mounted on the original rear-view mirror in the car. On the back there is a special self-adjusting handle thanks to which you can adjust to most mirrors, the handle clamps automatically, there are no screws. The high-resolution monitor will work wherever we need good image quality and ergonomic assembly. Installation of the mirror involves fixing it on the existing mirror with solid handles. The whole operation takes only a few moments, and is completely reversible. Mirror dimensions: Mirror width at widest point: 250 mm Mirror width at the narrowest point: 220 mm Mirror height: 108 mm Mirror thickness: 20 mm Mounting bracket spacing: 135 mm Recommended height of standard car mirror on which you can install this mirror with monitor: from 50 mm to 78 mm Specifications of the mirror with monitor: TFT LCD 7" monitor 2 AV inputs possibility to connect two transmitters using RCA (Cinch) - e.g. reversing cameras, DVD player, etc. Smooth (adjustable brightness - color- contrast) Display format 16:9 Resolution 800x480 px PAL/NTSC system automatically 12V power supply Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.