Silent Quartz Wall Clock Movement Mechanism DIY Kit with DCF Signal Mode for Repair and Replacement Parts for Clock Making

١٧٩٫٠٠ د.إ.‏
والشحن مجاناً

Silent Quartz Wall Clock Movement Mechanism DIY Kit with DCF Signal Mode for Repair and Replacement Parts for Clock Making

  • العلامة التجارية: Unbranded

Silent Quartz Wall Clock Movement Mechanism DIY Kit with DCF Signal Mode for Repair and Replacement Parts for Clock Making

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٣٢٩٫٠٠ د.إ.‏
السعر: ١٧٩٫٠٠ د.إ.‏
أنت توفر: ١٥٠٫٠٠ د.إ.‏ (45%)
البائع:
١٧٩٫٠٠ د.إ.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

1.The Clock can automatically synchronize Germany DCF Signal 2.The standard movement contains a miniaturized radio receiver that searches for the low frequency time signal that broadcasts from the Germany radio station DCF. 3.Good Radio movement will work well, Simple design, easy to use,Energy efficient, Accurate time keeping. 4.Quality material: the movement shell is made of material which is sturdy and for a long time, and the clock hands are made of quality aluminum, which is light in weight and -resistant to provide you with nice use and decorative effect.Quality quartz clock movement,long guaranteed. 5. This kit is good size replacement both in terms of the shaft and the size of the hands. It can be a replacement for your broken clock.Great for repairing, replacing or making a clock.You are enable to use it to repair, replace or make a home clock Applicable to -, three-dimensional embroidery, craft home clock, frame-less draw clock, clockwork, etc. Perfect DIY clock kit, and specially suitable for DIY quartz wall clock replacement movement parts, etc. Manual for Radio Controlled Clock Movement: 1 Overview: When the RCC switch is in the ON position, it has the function of radio wave reception. If it is in the OFF position, radio wave reception is not performed. 2. Start: Put the alkaline battery (AA1.5V, LR6) into the battery slot (pay attention to the polarity of the battery), you can see that the second hand is sweeping to zero (sometimes you need to press the reset button), after sweeping to 12:00, hour, The minute hand also starts to sweep to 12:00, and after the three-hand sweep ends, it enters the receiving state and starts to receive radio signals. This process takes Specification: Type: Non-Ticking Radio Clock Movement Overall shaft length: 14mm. Thread: 6mm Second hand length:126mm/4.96 inch Minute hand length: 105mm/4.13 inch Hour d length:83mm/3.27 inch Thread length: 14mm/0.55 inch Host Size. 56 x 56 x 16mm Rated voltage: 1.5V Battery life (specification): . 12 Months Use Battery: .5V AA Carbon battery (not included) Colour:black Material:Plastic and Aluminum Package Contents: 1 x Non-Ticking Radio movement 3 set x 3 clock hands 1 set x Accessories Note: This radio wave movement is only limited to Germany and and UK. It can only be used when the signal is received. Please know! Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.
  • هوية Fruugo: 384662575-827401746
  • EAN: 9554458759771

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: مجاناً - التسليم بين الأربعاء 29 أكتوبر 2025 – الأربعاء 05 نوفمبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Alaric
  • Suzhou Xinmi Kong Trade Co., Ltd.
  • 01-22, 9th Floor, W02 Building, Phase I of Nan'an Xindi Project, No. 11 Yangfu Road, Suzhou Industrial Park, Suzhou Free Trade Zone (Jiangsu ), China
  • Suzhou
  • CN
  • 215024
  • ijsldhxn@163.com
  • 13667873201

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901