GetCoupons Now! Description: Replace For Part Number: 40700-1LA0E PMV-C81140700-1LA0D 40700-1LA0C 40700-1LA0A 40700-1LA0B, 407001LA0E 407001LA0D 407001LA0C, 407001LA0A 407001LA0B, PMVC811 Operating Frequency:315MHz Package Content:1 / 4 TPMS SENSOR Application: For INFINITI EX35 2010-2012For INFINITI EX37 2013For INFINITI FX35 2010-2012For INFINITI FX37 2013For INFINITI FX50 2010-2013For INFINITI G25 2011-2012For INFINITI G37 2010-2013For INFINITI M35H 2012-2013For INFINITI M37 2011-2013For INFINITI M56 2011-2013For INFINITI Q40 2015For INFINITI Q60 2014-2015For INFINITI Q70 2014-2019For INFINITI Q70L 2015-2016For INFINITI QX50 2014-2017For INFINITI QX56 2011-2013For INFINITI QX70 2014-2017For INFINITI QX80 2014-2016For NISSAN 370Z 2010-2020For NISSAN CUBE 2012-2014For NISSAN JUKE 2011-2017For NISSAN LEAF 2011-2012For NISSAN QUEST 2011-2017 Note: 1.If you can not make sure which item fit for your car,please send theVIN CODEto us confirm it before order. 2.No sensor programming Required: The Tire Preure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Simplified Relearn :OBDIIrequired *Installation of TPMS is recommended to be performed only by trained profeionals. 3.Installation Proce . Loosen the tire: Remove the valve cap and core and deflate the tire. .Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. .Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. .Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the sensor body against the rim and tighten the screw. .Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.