Feature: 1. High Compatibility: Our programmable logic controller module is suitable for Delta, for Inovance, for Xinje and for Schneider. And module is with high compatibility. 2. Load Capacity: The controller can freely configure the load capacity, and the application environment is rich and diverse, and it is transmitted to the control terminal through for CANopen to control the equipment. 3. Slave Function: Our PLC controller has for CANopen protocol slave function, integrates 1 standard for CANopen interface, supports for CANopen 401 protocol, supports setting for CANopen baud rate, node number. 4. Remote Connection: Supports standard for CANopen communication protocol, RS485 serial port firmware upgrade function, realizes connection between remote equipment and for CANopen net, and constitutes a control node for signal acquisition input and output in for CANopen network. 5. Wide Range of Use: The module is suitable for industrial field net data acquisition and monitoring, remote communication in coal mines and oil wells, remote communication in teaching applications, industrial automation, building automation and other equipment or systems. Specification: Item Type: PLC Controller Material: ABS DI Input Points: 16 channels DI Input Type: Switching touch signal or level signal Signal Limited Range: DC20 to 28V Insulation Circuit: Optocoupler isolation Number of DO Output: 16 channels DO Output Type: Relay output, normally open contact DO Output Capacity: 2A / point, 8A / 4 points Insulation Circuit: Mechanical insulation For CAN Interface Type: DB9 male Baud Rate: Default 1000kbit/s (support 20, 50, 100, 125, 250, 500, 800, 1000) Communication Format: For CAN2.0A frame format, compliant with for ISO/DIS 11898 specification Size: Approx. 128 x 80 x 50mm / 5.04 x 3.15 x 1.97in(L x W x H). Package List: 1 x PLC Controller Note: Manual measurement may have 0‑1cm error. Please make sure you don't mind before ordering.