NVME Case Enclosure M.2 SSD Case M.2 USB Adapter SSD M2 SSD BOX Enclosure USB 3.1 Type-A to PCI-E M.2 NVME Mobile Hard Disk Case About Description: Product model: NVMe HDD Enclosure Main Chipset: Jmicron JMS583 Protocol: NVMe Connector: USB3.1 TYPE-A Case Color: Black Interface: USB3.1 TO M.2 KEY-M HDD Enclosure size: 108mm*25mm*8mm Support: for 2230, 2242, 2260, 2280 m.2 d Application : for 3D Game, 4K video ,HIFI Music, RAM Picture ect. Support system: WinXP/Vista/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or higher Features: Supports TRIM to the SSD Integrates with USB Type-Amultiplexer& configuration channel(CC)logic Complies with PCI Expre Base Specification Revision 3.1a Complies with NVM Expre 1.3 Complies with USB3.1 Gen 1 and Gen 2 Specification,USB Ma Storage Cla,Bulk-only Transport Specification(Revision 1.0) Complies with USB Attached SCSI Protocol(UASP)Specification(Revision 4) Supports USB Super-Speed/High-Speed/Full-Speed Operation Supports USB2.0/USB3.1 Gen 1/2 power saving mode Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.1 Gen 1/2 device controller Thirteen GPIOs for customization Provides hardware controlled PWMs Provides software utilities for downloading the upgraded firmware code under USB2.0/USB3.1 Gen1,2 Design for Windows 7,Windows 10 and MAC 10.10.5 or later version Supports 25MHZ external crystal Supports 3.3V I/O Embedded 5V to 1.0V voltage regulator Embedded 5V to 3.3V linear voltage regulator(LD0) Note: M-key connector, Only Supports for PCI-E based NVMe SSD, NOT suppport SATA protocol m.2 d. If your Hard disk protocol is NVME M.2, it can use with this driver case . You'll receive: 1 x USB3.1 Type A to NVME M.2 SSDEnclosure (With Case) or 1 x USB3.1 Type A to NVME M.2 SSD Adapter (NO Case) Please check pictures for more details.