LCR-TC1 Transistor Tester TFT Diode Triode Capacitance Meter NPN PNP MOSFET Product description: Display : 1.8 inch TFT Screen Diode Range : < 4.5V Zener Diode : Transistor Detect Area : 0.01-4.5V Zener Diode Detect Area : 0.01-30V Triac Range : IGT < 6mA Capacitance : 25pF-100mF Resistor : 0.01-50M Inductance : 0.01mH-20H Battery : 0.1-4.5V Power Mode : Rechargeable Lithium Battery (Include) Size : Approx 90 x 50 x 25mm Feature: It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc It can also be used to detect infrared wave forms It also can detect zener diode and has the function of self-calibration After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly Not like the usual black and white display, this detector will show results in color NOTE: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source! For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions! Always be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on ! We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged ! Package included: 1 x Multi-functional TFT Transistor tester 1 x Electronic component set(Send Randomly) 3 x Test hooks 1 x Cable