Feature:1. The shell is made of alloy material, which is wear resistant, not rusty, not easy to corrode, has excellent thermal conductivity, durable, strong power, long life, low loss, and low heat generation.2. Carbon brush structure replaces copper brush, with long service life, low friction, low power consumption and slow temperature rise.3. The use of silent lubricating oil ensures long term quiet operation of the motor shaft and effectively reduces the vibration value of the bearing to prevent rust and corrosion.4. The shaft is made of stainless steel, and the highprecision mechanism runs smoothly and is quieter. After the gear is ground, it has better performance and wear resistance after heat treatment.5. 8mm thick rod, long term use without heat, can make mini motors, DIY robot models, homemade shakers, etc.Specification:Item Type: Encoder Geared MotorMaterial: Zinc Alloy, Copper, Carbon, Stainless SteelPurpose: Industrial Drive DeviceOperating Voltage: DC 24VOutput Shaft Size (Diameter x Length): Approx. 8 x 33mm / 0.31 x 1.30inShaft Type: M8 Threaded ShaftWhether to Adjust the Speed: Adjustable SpeedWhether Forward and Reverse: Can Be Forward and ReverseParameters Table:Reduction Ratio (Change Ratio): 40/65/90/150/200/260/340/600/1000No-load Current (MA): 40 / 40 / 40 / 40 / 40 / 40 / 40 / 40 / 40No-load Speed (rpm): 150/90/66/40/30/23/18/10/6Rated Torsion (kg.cm): 0.2 / 0.5 / 0.7 / 2 / 5.3 / 6.7 / 9 / 15.9 / 26.5Rated Speed (rpm): 120/70/51/30/22/18/15 / 7.5 / 4Rated Current (A): 0.3 / 0.3 / 0.3 / 0.3 / 0.3 / 0.3 / 0.3 / 0.3 / 0.3Maximum Torsion (Kg.cm): 0.9 / 1.6 / 2 / 7.5 / 10/13/18/30/45Stall Current (A): 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85 / 0.85Reduction Ratio (Change Ratio) 40 65 90 150200 260 340 600 1000No-load Current (MA) 40 40 40 40 40 40 40 40 40No-load Speed (rpm)150 90 66 40 30 23 18 10 6Rated Torsion (kg.cm) 0.2 0.5 0.7 2 5.3 6.7 9 15.9 26.5Rated Speed (rpm) 120 70 51 30 22 18 15 7.5 4Rated Current (A) 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3Maximum Torsion (Kg.cm) 0.91.6 2 7.5 10 13 18 30 45Stall Current (A) 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85.Package List:1 x Encoder Geared MotorNote:1. Do not place the product in an environment that is too corrosive, humid and high temperature!2. Please supply power according to the operating voltage, using other voltages may cause fire and product damage.