Genset Controller 0.56in LED Display PC Panel for Diesel Generator SGC501 with TTL Interface Item Type: Genset Controller  Project Parameter Operating Voltage DC8V to 18V continuous power supply Machine power consumption Standby: maximal 1W Working: maximal2W Generator AC voltage input One phase and two wires (L-N input) 30VAC-360VAC (ph-N) Two-phase three-wire (L-N input) 30VAC-360VAC (ph-N) Three-phase four-wire (L-N input) 30VAC-360VAC (ph-N) Generator AC frequency input 50 / 60Hz Maximum accumulated running time 999 hours (minimum storage time: 6 minutes) Fuel output 7Amp DC + VE supply voltage output Motor output 7Amp DC + VE supply voltage output Current transformer secondary current Rated: 62.5mA Working conditions -25-70 ℃ Storage conditions -30-80 ℃ Protection class IP42 Insulation strength Apply AC1.5kV voltage between AC high voltage terminal and low voltage terminal, the leakage current is not more than 3mA within 1min Dimensions Approx. 118 x 128 x 36mm / 4.6 x 5 x 1.4in Hole Size Approx. 112 x 122mm / 4.4 x 4.8in Weight 0.25 kg / 0.6 lb(approx.) Parameter Display: Generator phase voltage L-N Generator active power KW Generator frequency Hz Generator current A Engine battery voltage Cumulative unit operating time Engine temperature Generator temperature Alarm Protection: Power overvoltage Undervoltage Underfrequency Over frequency Overload High engine temperature High generator temperature