PDB: Input voltage range: 9~30V (3~6S LiPo) with protectionCurrent Senor: 220A, 3.3V ADC (INAV scale 150, 66.7A/V)Sense resistor: 100A continuous, 220A Battery Voltage divider 1K: 10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in )MCU: STM32F405RGT6, 168MHz , 1MB FlashIMU: ICM42688-PBaro: DPS310OSD: AT7456E: Micro-SD card slot6x UARTs, 1x Softserial_Tx option(INAV)10x PWM outputs2x I2C3x ADC (VBAT, Current, RSSI)Built in inverter for SBUS inputUSB Type-C(USB2.0)BEC 5V output: controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeedContinuous current: 2 AmpsBEC 9V /12V output: Designed for Video Transmitter, Camera, Gimbal .Continuous current: 2 Amps12V option with Jumper padfor stable 9V/12V output, input voltage should output voltage +1VBEC Vx output: Designed for ServosVoltage adjustable, 5V Default, 6V or 7.2V optionsContinuous current: 5 Amps, 6A for stable Vx output, input voltage should Vx voltage +1VFC Firmware: : MatekF405-Wing (ArduPlane 4.4 or er)INAV: MATEKF405SE (INAV 6.0 or er)BEC 3.3V output: Designed for external 3.3V peripheralsLinear RegulatorContinuous current: 200mABEC Vx output: Designed for ServosVoltage adjustable, 5V Default, 6V or 7.2V optionsContinuous current: 5 Amps, 6A for stable Vx output, input voltage should Vx voltage +1VMaterial: composite materialscolour: BluePackage Contents: 1 x Flight ControllerOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.