ETCR090KU AC Leakage Sensor Split Core Current Probe              Technical Specification:                      Function       Detect AC leakage current, current, harmonic current, phase, power, power, power factor, etc.                 Detection method       Split Type CT, suitable for online installation                 CT size       φ90mm                 Range       0.000mA~10A AC                 Resolution       1uA AC                 Accuracy Class       0.5                 Turn ratio        1000:1(Can be customized on request)                 Phase error       ≤12°(50Hz/60Hz;23& 8451;±2& 8451;)                 Reference load       RL:0~1000mA≤300Ω; 0~10A≤30Ω                 Shield       Double shield suitable for complex interference environments                 Output        The current sense output can be externally connected to the RL to take the voltage.                 Output Interface       3P plug-in terminal output (S1, S2 coil tap , GND shield )                 Wire position       The tested wire is at the center of the jaw                 Response frequency       10Hz~100KHz                 Line voltage       below AC 600V                 Dimensions       179mm×171mm×31mm                 Weight       About 1350g                 Working environment       -15& 8451;~50& 8451;; below 80%Rh                 Storage environment       -10& 8451;~60& 8451;; below 70%Rh                 Insulation        AC 3700kV/rms (Between core and shell)                 Protection Type       IEC1010-1,IEC1010-2-032,Pollution  2,CAT & 8546;(600V)