Usage Tips:Key FeaturesEasy to Use: It can suck water by itself without the need for water diversion and extra equipment or auxiliary tools, thus making it more convenient for you to use in some outdoor occasions. All you need to do is connect the hose and accessories, plug it in and it's ready to go to work.High Efficiency: The 120W all-copper motor, 1.35-1.45 gal/Min flow rate, and 3.28 ft self-priming height can meet various needs of users and achieve faster water supply.Low Noise: The low noise motor (about 70-80dB) does not produce excessive working noise, and thus can provide you with a quieter working environment.Easy to Carry: The small size (10.2*3.9*4.1 inches) and lightweight (6.28 lbs) make it more convenient to carry. You can take it with you wherever you need to work.How to Use 1. Please make sure the end of the outlet hose is properly connected.2. Carefully plug the pump into a 220-volt, 50 Hz, grounded AC outlet to begin operation.3. The pump is self-priming and water should begin to flow in 30 seconds or less. (a) If water does not flow, unplug the outlet and check how the pump is installed and the inlet and outlet connections. (b) Operating the pump without water for an extended period of time may damage the pump and cause it to malfunction.4. Please unplug the pump when pumping is completed. The pump may become hot during operation. Please be careful when near or touching the pump.SpecificationMaterial: Rubber, Steel, NylonColor: BlackRun Dry: YesAssembly Required: YesItem: DP-160MPlug Standard: EU StandardVoltage: 220VAmp Draw: 0.55AType: 3 Chamber Diaphragm Flow: 5.1-5.5L/Min, 1.35-1.45gal/MinMaximum Withstand Temperature: 65/149Insert Size: 9.5mm/0.37in Hose Barb, ThreadOutlet Size: 9.5mm/0.37in Hose Barb, ThreadSelf-Priming: 0.5-1m/1.64-3.28ftMax Pressure: 160Psi(11Bar)Maximum Working Pressure: 80-90 PsiPower Cord Length: About 1.9m/6.23ftPower of Motor: 120WWorking Noise: Approx. 70-80dBNet Weight: 2.85kg/6.28lbsGross Weight: 3kg/6.61lbsProduct Size: 26*10*10.5cm/10.2*3.9*4.1inPackage Size: 34*12*10.5 cm/13.39*4.72*4.13 inPackage Included1 * Water Transfer Pump1 * English ManualAll Accessories for InstallationNotes1.Only clean water can be pumped, and liquids with impurities cannot be pumped.2.Products with electrical plugs are designed for use in the EU. Please check compatibility before purchasing.3.When the pressure switch is stopped, the pressure is 160 Psi. The maximum working pressure is 80-90 Psi.4.This is a self-priming pump, so please do not wet the motor.5. Before first use, for avoiding running the pump dry, please fill the pump head with water to wet the impeller, thus.6.This product does not include water inlet and outlet hoses, so please configure them yourself.