①. Bottom heating is adopted, and the inner pot directly contacts with the heating ring at the bottom to conduct temperature, and the wax melting time is shortened by one-third compared with traditional products. The product adopts intelligent temperature control technology, which can accurately control the temperature of melting wax, so that the wax beans can reach a good drawing state, and not burn the user's skin while removing hair. ②. The temperature can be adjusted and controlled up to 120 degrees Celsius. The shell has a heat insulation effect. Even if you accidentally touch it during the heating process of the machine, you don't need to worry about being scalded. (Note: Wax not included) ③. The inner pot is coated with PTFE, which is wear-resistant, beautiful and has a strong texture. The wax beans are not easy to stick to the pot, and it is easier to clean. In addition, the inner pot has a wax scraping setting, and the amount of wax used can be reduced according to need before waxing. ④. The Fahrenheit temperature and Celsius temperature can be switched arbitrarily (press and hold for 3 seconds to switch between the two temperatures), which caters to the usage habits of consumers in different countries and is easy to understand. ⑤. The wax melting temperature used last time can be memorized to save time. If you need to use the last wax melting temperature, you don't need to reset it. It can be done with one key, which is convenient and quick. ⑥. Product Name: Smart Wax Melting Machine ⑦. Power: 100W ⑧. Voltage: 100-240V AC 50/60HZ ⑨. Capacity: 500CC ⑩. Operation introduction~ ⑪. Step 1: Connect the plug, connect the power supply, and start the switch key. ⑫. Step 2: Pour the wax beans into the inner pot as needed, close the lid, and set the required temperature or follow the default temperature of the machine to 85 degrees Celsius or 75 degrees Celsius. ⑬. It needs to be specially explained that the set temperature is