DC 90~230V Nema 34/42 3 Phase Stepper Motor Driver 200Kpps Controller

1、The drive current is continuously adjustable from 2.2A to 4.8A, and the usability is strong. 2、When the pulse stops for more than 100ms, the coil current is automatically halved, and the highest pulse frequency can reach 200Kpps. 3、The drive has multiple protection functions such as: overcurrent, overvoltage, undervoltage, short circuit protection. 4、The motor driver is suitable for the outer diameter of 86 ~ 110mm series stepper motor. 5、Suitable for a variety of automation equipment and instruments in the field of motion control, such as: electronic equipment, semiconductor equipment, laser cutting and welding, packaging machinery, engraving machines, CNC machine tools, automated assemb Feature: The drive current is continuously adjustable from 2.2A to 4.8A, and the usability is strong. When the pulse stops for more than 100ms, the coil current is automatically halved, and the highest pulse frequency can reach 200Kpps. The drive has multiple protection functions such as: overcurrent, overvoltage, undervoltage, short circuit protection. The motor driver is suitable for the outer diameter of 86 ~ 110mm series stepper motor. Suitable for a variety of automation equipment and instruments in the field of motion control, such as: electronic equipment, semiconductor equipment, laser cutting and welding, packaging machinery, engraving machines, CNC machine tools, automated assembly equipment. Specification: Model: FYTM2205T Voltage: DC 90~230 V Drive current: 2.2~4.8A/phase (16 level adjustable) Subdivision: The highest resolution is 6000 steps/rev (16 level adjustable) Maximum pulse frequency: 200 Kpps Suitable: Outer diameter 86 - 110mm series stepper motor Installation size: Package list: 1 * Motor driver Note: 1. The falling edge of the input pulse signal is valid; 2. The input control signal level is 5V. When it is higher than 5V, the current limiting resistor needs to be connected, and the driver has its own 24V signal interface; 3. When the input voltage is lower than AC90V or higher than AC230V, the drive will automatically protect; the fan of the drive will start working when the temperature of the drive exceeds 48 °C. 4, fault indicator: ALM red light long light indicates over current; ALM red light and PUL, DIR two green lights alternately indicate overheating; ALM red light flashing indicates overvoltage; ALM red light and PUL green light alternately light means no motor; The ALM red light and the DIR green light simultaneously indicate undervoltage. When all faults occur, please check the motor wiring and other short-circuit faults. After the fault is removed, you need to restore power again. 5. Set the DIP switch SW10. If the motor rotation is needed but the corresponding upper control signal is missing, try to use the built-in self-test function of the controller. (External pulse is received at OFF, and the drive operates at 30 rpm at ON when ON).