DC12V 20A Time Module Relay Delay Digital Module Delay Bike Module 1500W 0-999h Specifications:Time Range: 0-999s,0-999m,0-999h Supply Voltage: DC12V Time Range: 20A Working Current: 10A (Max) Power: 1500W (Max) Size: 79 x 26 x 43mm / 2.99" x 1.02" x 1.69" Hole Size: 72 x 40mm / 2.83" x 1.57" User Manual:1. After setting the data, you need to wait for 6 seconds, the 6s mail modules automatically save the memory set data.2. Press the SET button once to enter the time setting mode, the red LED flashes, press the key to increase or decrease the T1.3 setting time. After setting the T1 time, short press the SET button again, the green LED flashes, and the time is set by pressing the T2 time key, the T2 time setting is completed, press the set button again, the system will automatically save the memory setting time or wait for 6s, the 6s module will automatically save the data memory.4. Long press SET, enter the parameter setting mode. There are two sets of parameters for the user to select P0, P1. Short press SET in the current mode to toggle between P0 and P1.5. In parameter P0, you can set by pressing a key to adjust your own timing mode. In parameter P1, you can set by adding and subtracting the operating mode keys. Q0-0: T1 timing mode is second. P0-1: T1 timing mode is minutes. Q0-2: T1 time mode is hour. P1-0: delay T1, pull relay (timer T1)P1-1: release relay after T1 with time delay (timer T1)P1-2: delay T1, pull relay (timer T1), and then release relay after T2 with time delay (time T2), and then finish. P1-3: release the relay after T1 with a time delay (timer T1), then delay time T2, pull the relay (time T2), and then terminate. P1-4: T1 delay, pulling the relay (T1 timer), and then releasing the relay after T2 with time delay (T2 timer), cycling. P1-5: Relay release after T1 with time delay (T1 timer), then T2 time delay, relay pull (T2 timer), cycling.1 X Time Delay Relay Module