Mice & Trackballs Darmoshark M3s Mini 2KHz E-sports Gaming Mouse Wirele Bluetooth 26KDPI PAW3395 Optical Sensor Mice For Laptop Computer Gamer M3 Triple-mode Game Mouse Specifications Size 122.7*62.5*37.mm Number Of Key 7KEY Color Black / White / Red/Gray/Yellow/Pink Weight Net weight 545G, Receiver 1.6G Shell material ABS Apron Black rubber Foot Sticker Teflon PTFE(black) NANO Receiver Built in Bottom Left and right switch operating force Genuine TTC Gold micro-action 655gf Left and right switch life 6000Ten thousand time Middle key switch operating force Genuine TTC 7010gf Middle key switch life 500Ten thousand time Side key switch operating force Genuine TTC 7010gf Side key switch life 300Ten thousand time 3DKey operation force 10020gf(vertical force at the center of the mouse button) Encoder Genuine TTC Golden Wheel Encoder life 200Ten thousand circle master control IC Three-mode Telink micro-Telink solution,2.4G/Bluetooth 5.0/wired Wire Type-C Data cable five-core braided flash rope with magnetic ring Wire length Total wire length: 2M1% Interface GildedUSB2.0 Type-C interface Operating temperature -1050 Working Humidity 10-90%RH Operating Voltage USB Wired:DC5V5% Wirele:DC3.7V Working current USB Wired:<50MA Wirele:lights are always on<15MA, dull<6MA Lithium Battery Capacity 500MAH;Endurance without light: About 110 hours between intervals of use (calculated for 8 hours of office work);About 55 hours of continuous use; Operating System Wired and 2.4G mode: WinXP/Win7/Win8/Win10/Win11/MacosBluetooth mode:Win8/Win10/Win11/Maco Bottom sensor Light Infrared light DPI/Return Indicator On for three seconds and off Photoelectric IC PAW3395 Highest Resolution 26000DPI(driver can be set) DPI factory default 5partDPI cycle adjustment: 400 red, 800 blue (default), 1600 green, 3200 purple, 4800 orange Wired/2.4G Return Rate Adjustable buttons at the bottom: Red light 125HZ, blue light 500HZ (default), green light 1000HZ, purple 2000HZ Wired/2.4G return rate Adjustable buttons at the bottom: red light125HZ, blue light500HZ(default), green light1000HZ Bluetooth rate of return The default 125HZ is not adjustable SPI sampling time Changes in sync with the rate of return: 8ms/2ms(default)/1ms/0.5m FPS Image Proceing 26000fp Maximum speed 650ip Acceleration 50g Drive only support Windows system Wirele transmiion distance The measured distance in the office environment is about 10 m computer connection Plug and play in wirele mode, when wired and wirele are used at the same time, it is preferentially recognized as wired mode Wake up from hibernation After 5 seconds, it enters the first-level sleep mode; after 60 seconds, it enters the second-level sleep mode. In sleep mode, clicking or moving can wake up the mouse. charging indication When the data cable is connected, the indicator light of the roller position is always red, indicating that it is charging, and it will turn off after it is fully charged. (Charging time is about 3-5 hours)Note: This product supports up to DC5V charging voltage and 300MA charging current. We are not responsible for any problems caused by improper charging. low battery indicator When the wheel position indicator is blinking yellow,Indicates that the battery is low and needs to be charged,In order to ensure the normal use of the mouse(Slight deviation according to actual usage) 2.4G and Bluetooth mode indicator When the three-position switch at the bottom is turned to the G icon, the green light at the position of the scroll wheel will be on for three seconds and turn off.When the three-position switch at the bottom is turned to the B icon, the blue light at the position of the scroll wheel will be on for three seconds and then turn off (provided that the Bluetooth connection is succeful). Bluetooth pairing operation When the three-position switch at the bottom is turned to the B icon, pre the left, middle and right buttons at the same time, the blue light at the position of the wheel will flash, and enter the pairing state. At this time, you need to turn on the Bluetooth device and search for the M3 Mouse to pair. After the connection is succeful, the indicator light goes out. 2.4G pairing operation When the three-position switch at the bottom is turned to the G icon, pre the left, middle and right buttons at the same time, the green light at the wheel position will flash, and enter the pairing state. At this time, you need to insert the receiver. After the connection is succeful, the indicator light will go out. (Note: The pairing is OK at the factory. If the 2.4G has no function, you can follow this step) wired mode When plugging in the type-c data cable connection, the wired mode is p