D80 Bluetooth Tattoo Stencil Printer Portable Inkless Rechargeable 2600mAh WirelessThermal Tattoo Printer Machine with A C Adapter for PC Smartphone Black Item Type: Tattoo Thermal Transfer Machine Material: ABS, Electronic Components Battery: Built in Lithium Battery 2600mAh (Included) Input: 5V 2A Charging Port: Type C Transfer Machine Size: Approx. 265 x 80 x 48mm / 10.4 x 3.1 x 1.9in Printing Speed: 10mm/s (maximum) Printing Type: Thermal Printing Applicable Printing Paper: Thermal Printing Paper or A4 Quad Tattoo Transfer Paper Paper Width Specifications: Approx. 50 ~ 216mm / 2 ~ 8.5in Connection Interface: USB C/BT2.0&BT4.0 Operating Temperature: 0℃~+40℃ Standby Time: About 30 Days Charging Time: About 1.5 Hours Supported Devices: Mobile devices (for IOS, for Android supported), PC (for Windows,) How e: 1. Install the application APP Download Method (1) for IOS users: Scan the QR code on the instruction manual or the packaging box; (2) for Android users: Scan the QR code on the instruction manual or the packaging box; 2. Power on/off Power on: Press and hold the power button for 2 seconds until the indicator light comes on. Power off: Press and hold the power button for 2 seconds until the indicator light goes off. 3. Paper loading operation Pull out the tattoo printing paper and tear off the yellow paper, open the printer's flip cover, put it in a neat, white faced down, and smoother the coated face. Then, close the flip cover. 4. Paper jam, exception handling, and cleaning As shown in the figure: Press down the cover opening button, open the flip cover component, rotate a certain angle, and clean the printhead with a soft cloth dampened with water. ★Tips: When connecting, please make sure that the Bluetooth of the mobile phone is turned on and the device is close to the mobile phone. 9. Paper Type It is recommended e dedicated printing paper. Non dedicated printing paper may not be eco friendly, cause paper jams or inaccurate paper feed readings, and also easily skewed printing. 10. Frequently Asked Questions Q: Why can't the APP find a device to connect when adding a device? A: Please check whether the device is turned on and the Bluetooth is working properly. Q: The device can't print, what should I do? A: Confirm whether the Bluetooth of the mobile phone is turned on and exclude others from connecting to this device; Check whether the tattoo printer jammed paper; Whether the printhead is overheated if it is overheated, please wait for the printhead to cool down before trying to print again. Q: Why are all the printed pages blank, with no content? A: This may be caused by incorrect installation of the printing paper. Please refer to the introduction of changing the printing paper for reinstallation. Q: Why are the printed words fading? A: ①Please check whether the device is low on battery. Check whether there are dirt on the printhead, please gently wipe with a cloth dipped in cleaning water. 11. Safety and prevention measures ●Do not charge or use the printer in high temperature, damp or dusty places. ●Please use 5V2A input for charging, or you can use the mobile phone power adapter for charging. ●After printing, please do not touch the printhead directly to prevent overheating and burns. ●Please gently plug in or pull out the charging cable to avoid damaging the interface due to excessive force. ●Improper charging may damage the printhead. ●Please unplug the charging cable in time after charging is complete. ●Place the machine on a sturdy horizontal surface to prevent the machine from falling and being damaged. ●When the machine is not in use for a long time, please turn off the machine power. ●Prevent foreign objects from entering the machine to avoid causing malfunctions or other dangers.