ATOMS3R CAM Camera Development Board ESP32-S3 Mini Programmable Controller Pre-installed UVC Firmware Easy

The ATOMS3R Cam is a mini programmable logic controller (PLC) with an integrated camera. It features the ESP32-S3-PICO-1-N8R8 main controller with integrated Wi-Fi, 8 MB of onboard flash memory, and 8 MB of PSRAM. Integrated power management converts 5 V to 3.3 V. It also includes a 3-axis geomagnetic sensor (BMM150) and a 6-axis orientation sensor (BMI270).The camera is equipped with a 0.3 MP sensor (GC0308) that supports image capture and infrared transmission control. Compared to previous models, the AtomS3R Cam's 3D antenna has been improved, resulting in higher percompatible withmance and greater stability. The camera comes with pre-installed UVC (USB Video Class) firmware and can therecompatible withe be used driverless via the USB interface.The camera requires no driver installation and can be used directly via the USB interface. The product features a USB-C interface compatible with power and firmware updates, as well as an HY2.0-4P expansion port. Six GPIO and power connectors on the bottom allow compatible with easy expansion. Its compact design makes it ideal compatible with embedded applications such as monitoring IoT devices and developing learning tools.Integrated ESP32-S3-PICO-1-N8R8 main controller300,000-pixel GC0308 cameraNine-axis sensor system (six-axis BMI270 sensor + three-axis BMM150 geomagnetic sensor)8 MB Flash memory and 8 MB PSRAMSupports infrared controlExpandable connectors and interfacesDevelopment platcompatible withms: Arduino, UIFlow MicroPythonApplications:Driver-free USB cameraMotion and direction detectionWearablesSmart device controlIoT applicationsNote: Due to different production batches, variations in the printed image/appearance may occur, but these do not affect functionality.Color: As shownMaterial: Plastic + componentsPackage contents:1 * ATOMS3R cameraOnly the above package contents are included. Other products are not included.Note: Light reflections and different screen settings may cause the color of the item in the picture to differ slightly from the original. The allowable measurement deviation is +/- 1 mm.