Adjustable Timer Relay Switch with Delay ON OFF Function for AC 110V 220V Power Control

Function: Delay for a period of time to stop power supply. Small size, simple to use, stable performance.<br> Module function: This module is a delayed shutdown module. When the set delay time expires, the power supply is stopped.<br> Wide range of uses: Suitable for exhaust fans, motors, air coolers, cooling fans, germicidal lamps, humidifiers, heaters, etc.<br> Applicable scenes: Living room, kitchen, bathroom, bedroom, corridor, stairs, etc.<br> Parameters:<br> - Output current: 7A (MAX 10A)<br> - Working power consumption: 43mA<br> - Output voltage: AC110-220V<br> - Power supply voltage: AC110-220V<br> - Maximum standby power consumption: 12mA<br> - Number of control channels: 1 output<br> - Working temperature: -25°C to 85°C<br> - Working humidity: 5% to 95% RH<br> - Control power: Up to 1400W for incandescent lamps, up to 300W for energy saving lamps<br> - LED indicator shows working status (steady light indicates active, flashing indicates delay complete)<br> - 16 selectable delay modes: 1, 3, 5, 10, 15, 25, 30, 40, 50, 60, 90, 120, 180, 240, 300, and 480 minutes<br> Working status: After power on, the indicator light (PWR) remains steady; when the delay time ends, the indicator light flashes.<br> Instructions:<br> - Set the required delay time (do not adjust while powered).<br> - After confirming correct wiring, apply power. The module starts working immediately (indicator light stays on). When the delay period ends, power supply stops (indicator light flashes).<br> - To shut down early during operation, disconnect the main power supply.<br> - To start a new delay cycle, power the module on again.<br> Color: As shown<br> Material: PCB + Components<br> Style: B with housing<br> Note: Appearance may vary slightly between product batches, but this does not affect functionality.<br> Package Contents:<br> 1 x Delay Relay Switch<br> (Other items not included)<br> Note: Lighting and display differences may cause slight color variations. Measurement error allowed within +/- 1-3 cm.