1、Fit for vehicles after 2000, including new and future models under production. 2、Support WIFI and USB connection, which can realize wireless communication between vehicle and diagnostic interface. 3、In the infrastructure mode, multiple devices with networks functions can be connected together (networks subscribers). 4、The estimated remaining time is displayed for ECU flash operation. The documents in GFF are displayed in a separate window. 5、The measured value display is improved. Automatically delete and save the diagnostic protocol after successful transmission. Item Type: Diagnostic Tool Material: ABSSystem: for win7, win10 Power Supply: 8-18V (via vehicle connector) Output: 5W PC Interface (wired): USB 2.0 high speed, 480 Mbit/s or fast Ethernet, 100Mbit/s (via LAN module) PC Interface (wireless): WLAN 802.11 ab / b / g / n 2T2R 300 Mbit / s client mode (WPA2 EAP-TLS, WPA2 PSK) AP Mode: (WPA2 PSK) Function (support): Point-to-Point Connection: With point-to-point connection via a wireless network, it creates a radio network. Thereby adopts the role of a radio access point (Access Point). A direct connection is made between the diagnosis unit and the diagnosis interface . Configured using the web-based user interface. New Features of 4.13 Software: – The estimated remaining time is displayed for ECU flash operation. -Diagnostic protocol includes GFF session interruption, extended measurement values, improved ECU communication view, diagnostic hardware used, connection type of diagnostic hardware, operating system, patches used, and submission of support requests – The measured value display is improved. – The documents in GFF are displayed in a separate window. – A message box will be displayed at the beginning of the test drive mode. -GFF patches can be integrated during the diagnostic session. – The danger message has been modified. -The stop of the diagnostic session may be interrupted. -Automatically delete and save the diagnostic protocol after successful transmission. -Improved the selection of PassThru diagnostic hardware. – The service software update has stabilized. How to Use: 1. Find the OBD interface on the car. (Most are on the driver's side under the dashboard) 2. Insert the diagnostic tool into the diagnostic computer. 3 Turn the ignition switch key to the 0N position. (Car power state) 4. Wait for the data download to complete, and follow the prompts to find that the test data has been received. 5. Refer to the instructions provided with the diagnostic tool, computer software or website to translate the fault code. Most reports include fault codes and fault names, defined conditions and possible causes. 1 x Diagnostic Adapter 1 x Diagnostic Cable 5 x CD 1 x Tape