Product Description 5.8GHz Microwave Radar Sensor, Button-Type LED Light Sensor, Human Motion Detector Product Overview: When someone enters the sensor area and the lighting requirements are met, the microwave switch automatically turns on, the appliance starts working, and the delay system activates. The appliance will continue to work as long as the person remains in the sensing area. When the person leaves the sensing area, the sensor begins calculating the delay. After the delay, the sensor switch automatically turns off, and the appliance stops working. Truly safe, convenient, intelligent, and energy-saving. Product Features: 1. Sensitive sensing, accurately identifying both biological and non-biological movement, resulting in an extremely low false alarm rate. 2. Strong anti-interference capability: Operating at a 5.8GHz frequency, minimal external natural influences, ensuring stable and reliable performance. 3. Automatic measurement: Automatically detects ambient light intensity; illuminates when the lighting requirement is set and someone is present; otherwise, it remains off. Technical Parameters: Operating Voltage: AC85-250V Standby Power Consumption: 0.9W Transmit Power: Less than 10mA Operating Frequency: 5.8GHz Sensing Distance: 2-16m (Adjustable) Operating Delay: 8 seconds to 12 minutes (Adjustable) Light Control Brightness: 2-200 LUX (Adjustable) Load Power: 800W (Resistive Load), 200W (Capacitive Load) Four Precautions: 1. Disconnect the power supply during installation to avoid danger. 2. This product is not waterproof; please take precautions against moisture and ensure it is sealed properly. 3. The microwave sensing angle is 360 degrees; please pay attention to the installation method. 4. This product contains high voltage; do not disassemble if you are not a professional, otherwise it may cause serious consequences. Color: White Material: Plastic Package Contents: 1 x Microwave Oven Radar Switch This package only includes the above contents and does not include other products. Note: Light reflection and different monitors may cause the color of the product in the picture to differ slightly from the actual product. The permissible measurement error is +/- 1-3 cm.