Learning: Press the learning button, the indicator flashes and turns off. Release the button, then press any button on the remote transmitter. The indicator flashes three times, indicating learning is successful. (Press the learning button according to the desired working mode.) Clearing: Press and hold the learning button for about 8 seconds. The indicator light flashes several times and then turns off. After this, pressing the remote will not trigger a response from the relay, indicating code clearing is successful. About Receiver: Model No.: AK-C211008 1. Working voltage: DC12V–36V 2. Quiescent current: Less than 6mA 3. Operating temperature: -40°C to +80°C 4. Receiver sensitivity: Better than -105dBm 5. Operating frequency: 433MHz 6. Maximum load current: 10A Working Modes (selected via learning button): Momentary: Press the learning button once. Relay operation: Press → On; Release → Off. Toggle: Press the learning button twice. Relay operation: Press → On; Press the same button again → Off. Latched: Press the learning button three times. Relay operation: Press → On; Press another button → Off. 2-Channel Momentary + 2-Channel Latched: Press the learning button four times. 2-Channel Momentary + 2-Channel Toggle: Press the learning button five times. 2-Channel Toggle + 2-Channel Latched: Press the learning button six times. About Transmitter: 1. Buttons: 4 2. Working voltage: DC6V 3. Operating frequency: 433MHz 4. Remote control distance: 50–100 meters 5. Operating current: 12mAh 6. Encoding: EV1527 Remote Quantity: 2 pcs or 1 pc Color: White & Black Material: Plastic + Metal Package Contents: 1 x Remote Control Switch Receiver 2 x Remote Control Switch Transmitter OR 1 x Remote Control Switch Receiver 1 x Remote Control Switch Transmitter Note: Light reflection and differences in display screens may cause slight variations between the color of the item in the image and the actual product. Measurement error allowance: +/- 1–3 cm.