Feature: - High-performance STM32 F722 MCU with speeds up to 216MHz. - ICM42688P gyroscope, independent low-noise power supply. - Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port. - Built-in analog video OSD, 16 Mbytes black box, - High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output. Specification: Brand: Holybro Model: Kakute F722 Item Name: F7 Flight Controller MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash IMU: ICM42688-P (SPI) Barometer: BMP280 OSD: AT7456E 5x hardware UARTS (UART1,2,3,4,6) 7x PWM Outputs (6 Motor Output, 1 LED) Onboard 16 Mbytes for Blackbox logging Battery input voltage: 3S - 8S BEC: 9V/3A, 5V/2A, 3.3V/0.2A Connector -2x JST-SH 8pin port for ESC -1x JST-SH 6pin port for HD VTX -2x JST-SH 4pin port for Receiver & Analog Camera -1x JST-SH 3pin port for LED USB Type -C Dimensions: 35x35mm Mounting Holes: Standard 30.5 x 30.5 Weight: 8g Firmware Targets Betaflight Target: KAKUTEF7MINIV3 INAV Target: KAKUTEF7MINIV3 Package Includes: 1x Kakute F722 Flight Controller 4x M3 Silicon Grommets 1x JST-SH1.0_8pin 150mm Cable (For ESCs) 2x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit) 1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX) 1x JST-SH1.0_4pin to Dupont 150mm Cable 1x JST-SH1.0_3pin to Dupont 150mm Cable 1x JST-SH1.0_4pin to Molex1.25 150mm Cable