30.5mm*30.5mm F722 F7 Flight Controller FC 3-6S Lipo 5V/10V Dual BEC w 60A 4in1 BLheli_S ESC Stack for RC 7 inch 10 inch FPV Freestyle Racing Drone Note: 1. Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2. Due to the manual measurement and different measurement methods, please allow 1-3mm deviation. Descriptions: F722 Flight controller: the fpv-freestyle flight controller has been designed for optimal control of flight, which allows you to have more control over the flight. The controller is equipped with fpv, ac adapter, and a power cable. it can be used to connect the drone to the controller. Features: 1. The F722 is a 3-8S 36x36mm mini flight controller with a 16MB Blackbox flash memory, 5V 10V dual BEC. Designed for easy maintenance and low interference. 2. The PCB adopts high-end composite material, which has stronger overcurrent capability and good heat dissipation. MOS adopts imported high current resistance mos, low energy consumption, long life and strong load capacity. 3. Using industrial grade LDO, high temperature resistance. High-quality capacitors, strong filtering performance. 4. Intelligent control: The controller has a built-in low-noise button, which can be controlled remotely by one button. 5. Maximum power: The OSD allows you to control your drone with maximum speed and accuracy, while providing a smoother flight. Specification: Model Specification F722 F7 Flight Controller MCU: STM32F722RET6 IMU: ICM-42688 OSD: AT7456E Baro: SPL06-001 Blackbox: 16MB Input voltage: 3-6S Lipo(11.4-36V) 5V-BEC: 5V/2.5A 卤0.1V 10V-BEC: 10V/2A(USER1) IO2: USER2 Receiver: ELRS(CRSF), TBS(CRSF), SBUS.IBUS.DSM2.DSMX UART: UART1/2/3/4/5/6 IIC: 12C1 Led Strip: YES Buzzer: 5V ESCsignal: Support PWM, Oneshot125, Oneshot42. Multishot Dshot150, Dshot300, Dshot600 USB: TYPE-C Current port: YES Voltage sensor: YES DFU button: YES Firmware: Betaflight 4.3.1 JHEF7DUAL.HEX Size: 36*36MM Mounting Hole: 30.5*30.5*4MM Weight: 8.8g BLS-60A 4in1 3-6S ESC Aperture: 30.5 * 30.5mm (after installing the shock absorber ball, the aperture is 3mm) Firmware: BLHELI-S Input voltage: LIPO 3-6S Continuous current: 60A Maximum current: 65A (10 seconds) Processor: EF8BB21 Drive signal support: DShot150-300-600/Multishot/Oneshot/PMW Current sensor: supports Size: 41 * 39 * 5mm Weight: 15g Package Included: 1x F722 F7 Flight Control Kit or 1x BLS-60A 4in1 3-6S ESC Kit or 1x F722 F7 Flight Control + BLS-60A 4in1 3-6S ESC Stack Kit