Specifications 1. Name: do electric welding tool 3. Green color 4. Material: iron alloy 5. Ambient temperature: -20 50 6. Relative humidity: 45% do 95% 7. Voltage range: AC 176 V 245 V 50 1 Hz 8. Heating head temperature: 260 5 9 . Safety indicators: insulation resistance not less than 1MΩ 10 . Leakage current: less than or equal to 5 mA (AC rms) 11 . Size: 33x12 cm 12. Box size: 36x15 cm Characteristics - Welding of plastic pipes type PP/PPR/PB/PE/PP-C etc. - Designed do long use. - Non-slip grip, comfortable to hold. - Equipment suitable do pipeline construction. - Manganese steel panel, fast heat conduction. -Thick, gold touch head, fast heating. The package contains 1 x do pipe welding machine 3 x welding heads (20 mm, 25 mm, 32 mm) 2 x screw 1 x Key 1 x auxiliary shelf; 1 x Iron Chest Instruction 1. Install the heat sink on a stationary welding device, place the welding device on the rack, mount the appropriate heating matrix according to the required pipe specifications and use a tightening wrench, usually small on the front and back. 2. Turning on: switching on (note that the power supply is connected do of the protective cable), the green light lights up until do the green light goes out, the red light lights up, indicating that the fuse goes into automatic temperature control mode, you can start working. 3. Welded pipe: do cutter with straight cutting of the pipe, the pipe and the pipe at the same time without rotating in the fuse die, and in accordance with the requirements of the service table, immediately after the pipe and the pipe are removed from the die at the same time, quickly and without rotating directly do the required uniform depth, so that the joints open into a uniform flange. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.