Safe to use: The shower curtain rod bracket can effectively support the shower curtain rod to prevent it from falling and hurting people or damaging the bathtub and the wall, and provides you with a comfortable bathing space .Multiple Installation Methods: The fixer comes with adhesive and screws. If your wall is smooth, you can directly tear off the protective layer of the sticker and paste it. If your wall is rough, you can use screws to fix it. You can also use two ways at the same time.Size: The size of the shower curtain rod bracket is 8*8cm, which is suitable for curtain rods with a rod end diameter of 6cm, and suitable for most shower curtain rods in the market .Tips: If you want to paste the bracket, please make sure the wall is tidy and clean, so as not to affect the adhesion; if you want to fix it with screws, please make holes in advance.Fashion Design: The simple appearance of the white shower curtain rod bracket is suitable for a variety of home decoration styles. bathroom, giving you safety and visual enjoyment.Specification:Material:ABSColor:whitePacking List :2*Square Shower Curtain Rod Bracket4*Screws4*Expansion TubeThe Steps instructions are as follows:Step 1. Clean the mounting surface and dry it thoroughly with a paper towel.Step 2. Remove the protective paper on the back of the sticker.Step 3. Position and stick the rod holder bracket in the desired position and press the adhesive firmly for 10 seconds.Step 4. Install the shower curtain rod into the socket to complete the installation.Quick:If you want to remove the shower curtain rod bracket, you can use a hair dryer to heat the super glue, then use a knife to peel off the backing, and finally wipe the wall with alcohol.Note:1. For manual measurement, please allow 1-2cm error.2.Color may have a little difference due to lights, screens etc.