Name: Electronic Drain Valve Indicator Lamp: LED indicating on/off Voltage Range: ±10% Protection Grade: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240 V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components. Clean the compressed air system before installation. Observe flow direction during installation: outlet must not be obstructed; hose must not be subjected to impact. Ensure supply voltage matches the drain valve rating: when using DC, connect positive pole to terminal 1. At factory shipment, the drain valve is pre-wired: brown = L (live), blue = N (neutral), yellow-green = GND (ground). Tighten the screw on the terminal box securely to prevent moisture ingress. Warning: Before installing the electronic drain valve, ensure the compressed air system is fully depressurized and the power supply is disconnected. Color: Gold + Black Material: Metal Size: Aperture: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Colors may vary slightly due to lighting and screen settings. Measurement tolerance: ±1–3 cm.