Product DescriptionMaterial: Water-based PrimmerNet Content: 100 mlIncludes: 1 x Rust Converter Agent + 1x BrushDescription:Having a rust problem with your car chassis?Rust chassis changed beyond recognition.Dont worryOur Chassis Rust Converter will help you solve the problem easily.It is the easiest-to-apply, fastest drying rust converter. It takes existing rust and transforms it into an inert coating, sealing out moisture and preventing future rust and corrosion.No more scraping, sandblasting or grindingThis all-in-one surface conditioner and primer creates a dark, protective polymeric barrier thats weather-proof and ready for a fresh coat of paint for your car chassis. This Chassis Rust Converter will provide more than twice the rust protection.MAIN FEATURES:[ Convert Existing Rust ]It transforms the existing rust into a dark and protective polymeric barrier, which is weather-proof and ready for a fresh coat of paint for your car chassis. And will provide more than twice the rust protection.[ Protect Iron and Metal Surfaces ]It revives and protects iron and metal surfaces on automobiles, dumpsters, equipment, railings, etc.[ Prevent Future Corrosion ]This rust treatment prevents future corrosion by locking out moisture from rain and snow. And dries in 20 minutes.[ Eco-Friendly ]It is non-flammable, low VOC, water-based treatment, eco-friendly.[ Surface Preparation ]Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, and grease.[ Easy to Use ]Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint.Warm Tips:Do not apply this product if the surface temperatures are below 50F.Store it in a cool, dry place, protected from freezing or temperatures above 100F.For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.Application equipment should be cleaned immediately with soap and water.