020MA/420MA/010V Signal Generator Battery Analog Current Signal Source Easy Install Easy to Use

٤٤٩٫٠٠ د.إ.‏
والشحن مجاناً

020MA/420MA/010V Signal Generator Battery Analog Current Signal Source Easy Install Easy to Use

  • العلامة التجارية: Unbranded

020MA/420MA/010V Signal Generator Battery Analog Current Signal Source Easy Install Easy to Use

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٦٧٤٫٠٠ د.إ.‏
السعر: ٤٤٩٫٠٠ د.إ.‏
أنت توفر: ٢٢٥٫٠٠ د.إ.‏ (33%)
البائع:
٤٤٩٫٠٠ د.إ.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

This signal generator uses a precision multiturn potentiometer to generate clean and adjustable current and voltage signals. By turning the potentiometer, you can produce a 0/420 mA current signal and a 010 V voltage signal, with additional flexibility for different ranges. Key benefits Precise, adjustable signal generation through a single precision multiturn potentiometer for both current and voltage outputs Flexible output ranges: current outputs selectable to 020 mA or 420 mA, and voltage output from 0 to 10 V Suitable as a signal source for test benches, calibration routines, and control system debugging Realtime verification of current output with a dedicated display to aid calibration and setup What it outputs Current output: selectable 020 mA or 420 mA Voltage output: 010 V What it can be used for Signal source generation for test benches and instrumentation Valve adjustment and tuning in control loops Inverter control and general control system testing PLC debugging and verification of input channels Instrument testing and LED testing for signal verification Analog transmitter output for calibration and signal tracing Calibration and debugging steps Current display correction Rotate the multiturn potentiometer clockwise to the maximum position Pull the display switch to the right Use a multimeter to measure the actual current output Adjust the potentiometer until the display value matches the measured current Ensure the display value is consistent with the actual current output Notes The device provides a straightforward method to generate and verify 0/420 mA and 010 V signals using a single control element Intended for use in applications requiring precise manual adjustment and verification of current and voltage signal outputs
  • هوية Fruugo: 418257280-881775877
  • EAN: 762537985204

التسليم والرد

يُرسل خلال 24 ساعة

  • STANDARD: مجاناً - التسليم بين الجمعة 03 أكتوبر 2025 – الثلاثاء 21 أكتوبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Shenzhen Tumi Technology Co., Ltd.
  • Shenzhen Tumi Technology Co., Ltd.
  • 202-03, Jinhe Building, 8 Xinhe Street, Maan Tang, Bantian
  • Longgang, Shenzhen, Guangdong
  • China
  • Shenzhen
  • CN
  • 518129
  • pettynfnef@outlook.com
  • 13332965772

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Axitera GmbH
  • Axitera GmbH
  • Kreuznacher Str. 30
  • D-60486 Frankfurt am Main, Hessen
  • Germany
  • Frankfurt am Main
  • DE
  • 60486
  • successservice3@gmail.com
  • (+49) 6934873848
  • https://seller.kuajingmaihuo.com/settle/qualification-service