Description: Item Name:ESC speeed controller Materail:Electronic parts Color:As shown Product Size:Length is 45mm,width is 21mm,wire length is 134mm and 104mm Product Weight:About 12g Compatible Models:RC Cars vehicles boats tanks,tracks or DIY models Specification: Peak Current:7A Support Voltage/Current:6V-14V,5A one-way,2-3s Lipo BEC Output:5V 1.5A About Two Modes: Mixing mode (default) (throttle/steering mode): 2 or 3 channels (2 channels are recommended, because 2 channels automatically return to the center) to control the throttle, 1 channel (or 4 channels) to control the speed difference steering, the throttle ratio is 100%, and the steering Scale 100%, steering priority. Suitable for: Tanks (in this mode, gun control can play tanks), 4-wheel drive cars Dual independent: it is equivalent to two independent ESCs Two-way synchronization: In the mixing mode, if the single yellow wire is not connected, or the single yellow wire is connected to the receiver '-', the two motors will be controlled by the accelerator synchronously Three Protections: With runaway protection (loss of signal (in an accident, the signal line is broken), for safety, motor protection, the accelerator needs to be returned to the center and unlocked again. Power failure protection: The power supply voltage is lower than 4V, the ESC restart protection (for example: high current discharge, the voltage drop of the battery with poor performance is too large, the ESC protection, the motor stops after the protection, and after the motor stops, the battery voltage recovers, Back to the neutral point, you hear the motor unlock again) There is overcurrent protection (but repeated overcurrent in use may also burn.) With overheat protection (130 degrees) Each group of motor wires is directly connected to the motor, do not mix it up, otherwise it will damage the ESC Connecting Scheme Please Click Here Package Included: 1X Brushed ESC 5A