Feature:1. SCOPE OF APPLICATION: This charging control module can be widely suitable for 660V any battery, lithium battery, easy to use2. LCD DISPLAY: The module adopts LCD display, the battery voltage, charging percentage and charging time can be seen at a glance3. MULTIPLE FUNCTIONS: Very powerful, can automatically charge control, can control the charging time, can set and upload the corresponding parameters through the serial port4. BASIC SPECIFICATIONS: The module control voltage is DC660V, control current is 10A, and the control accuracy is 0.1V5. PCB MATERIAL: This overcharge protection switch is made of high quality PCB material, and which output type is direct outputSpecification:Item Type: Lithium Battery Charge Control ModuleMaterial: PCBModel: XY-L10AControl Voltage: DC6-60VControl current 10AControl Accuracy: 0.1VOutput Type: Direct OutputVoltage Error: 0.1VScope Of Application: Various Lithium Batteries1. Function Description1. Automatic Charging Control Function: By setting the upper limit voltage UP and lower limit voltage dn, when the battery voltage lower limit voltage dn, the relay is turned on, and the charger starts to charge the battery, when the battery voltage the upper limit voltage UP, the relay is turned off to complete an automatic charging2. Charging Time Control Function: How to turn on the time control function?After Entering The Parameter Setting, If The Parameter Op Is Not set to 0, the time control function is enabled. The default parameters of OP are: --: --h, and the time control function is not enabled by defaultAfter The Time Control Function Is Turned On (op Is Not 0), when the battery voltage is less than the lower limit voltage dn, the charger starts to charge the battery, and the system starts timing, during the timing period, the battery voltage the upper limit voltage UP, the relay is disconnected, if the battery voltage <upper limit voltage, but the charging time OP time is up, the relay is disconnected, if the OP time is up, the battery voltage is still <lower limit voltage dn, the relay remains on, the charging time control function is automatically turned off, and H: ER flashes to remind the user that the time The parameter setting is unreasonable, press any key to stop flashingNote: Time Format: 00: 59 (00 Represents Hours, 59 Represents Minutes) The Longest Time is 99: 59, which is 100 hours.3. Serial Port Data Upload And Parameter Setting Function: The system supports UART data upload and parameter setting function (TTL level)UART: 115200,8,1On: The relay enable is turned onOff: The relay is enabled to closeStart: Start the data reporting functionStop: Stop the data reporting functionRead: Get system parametersdw10.0: Set the lower limit voltageup20.0: Set the upper limit voltageXX: XX: Set The Charging Time, 00: 00 Turns off the charging time control functionHow to Use:Parameter Settings: a. Press and hold the SET button to enter the parameter setting interface, and the LCD will display SETb. After entering the parameter setting interface, switch the set parameters by short pressing the SET keyc. After selecting the parameter, you can set through the UP DOWN key, support short press, long press (rapid increase or decrease)d. To set other parameters, repeat steps b and ce. After all parameter settings are completed, long press the SET button to exit and saveButton Function Description: In the running interface (main interface)Short press the SET button to display the currently set parametersShort press the UP button to switch to display the charging percentage and charging timeShort press the DOWN button to select on off the relay enable, if the relay enable is off, will display OFF as a reminder, the relay is disconnectedLong Press The Up Button To Set The Status Of The lcd backlight (l p), off: The Backlight Is Always On, On: The backlight will automatically turn off after 5-10 minutes;Long press the SET button to enter the parameter setting.Calculation Of Voltage Percentage: Battery voltage / (upper limit voltage - lower limit voltage).Additional Features: A. Charging Time Recording Function: When the charging time control is not turned on, will record the complete time once. When entering the time display interface, the charging time will flash and display, then exit the time display interface or clear when the follow charging is turned on (the relay is turned on). B. Automatic Parameter Detection: After setting the parameters and exiting, if the lower voltage limit dn the upper limit voltage up, the system will flash and display ERR as a reminderC. Battery Connection Detection: Attached to the battery, if is not connected to the battery, the system will display nbE in the lower line as a reminder.Package List:1 x Battery Charge Control Module