CANBUS MODULE with wiring used to start the replacement radio in cars of the brand Jeep / Chrysler / Dodge, and to start additional functions (steering wheel control, communication with the computer, activation of premium audio) Fits almost all models of cars Jeep / Chrysler / Dodge with rectangular and oval radios with left-right knobs (example radios on the left). With one of the plugins as on the left. Also with factory navigation. Includes both versions of plugins. DOES NOT FIT: - Chrysler Voyager with elliptical radio - Some versions of Chrysler 300C postlift - Factory elliptical radios, like the old Grand Cherokee - The module does not support factory reversing camera, (easy to overvoltage) Fits all 9 and 10 inch tablet radio navigations. Schemat of the connector next to it. If your radio in the ISO standard has digital inputs TX RX and a canbus library - you will also run additional functions. The beam also has a TX RX output - with a digital processed signal, for use (decoding) on your radio. 10 pin plug, suitable for any radio in tablet standard 9 and 10 inches. Digital signals from Canbus, readable by your device. (need to set the Canbus protocol in your radio options to get all the features). Without setting the Canbus protocol on your radio, basic functions will work, including the most important one, starting the radio. Setting the canbus on the radio: Simple -> Jeep/Chrysler/Dodge -> Set to a model similar to your car Canbus module inputs/outputs