Rain color effect under light: Enchants your room with beautiful play of light, with every change of light from outside there are new, subtle colors; Size: 90X200CM; Pattern: Check; Unlimited patterns at Rabbitgoo to choose from Privacy Protection: Provides privacy protection while allowing light to shine through; Privacy Protection Index: Semi-Privacy Protection Not suitable for bathroom Without glue: glue-free and environmentally friendly materials, avoids the release of chemical substances; static adhesive, can be attached within a few minutes (practical instructions printed on the inside of the cardboard packaging) Saving energy: it retains warmth inside in winter and coolness in summer, reduces heat transfer and blocks 96% of UV rays, protects your skin from harmful radiation exposure, reduces fading and aging of furniture Easy Removal: No residue after peeling off; This 3D window film can be reused as often as you like, it can be attached and removed again and again Beautiful patterns: Enhance your home decor with unique patterns User-friendly: Easily peel off the protective film, easy removal without damage or residue Glue Free: Just use soapy water to install. No toxic glue is required Reusable: High quality PVC material can be reattached and removed Blocks 96% of UV rays, protects your skin from harmful radiation exposure Semi-privacy protection: Combine decoration and privacy protection. Not suitable for bathrooms Attachment steps: 1. Thoroughly clean the window pane and window frame, especially the four sides and corners of the glass where dust can easily collect 2. Measure the area of the window pane to be glued exactly, and cut the film to 2-3cm larger than the window pane to be glued, so that the edges of the film can be easily trimmed after it has been applied 3. Loosen the carrier film (trick: fix two pieces of adhesive tape on the front and back at a corner of the film, and then pull the adhesive tape apart and the carrier film is removed) 4. spray the glass with soapy water 5. Attach the foil to the glass, it is best to start from the top 6. Squeeze out water and air bubbles with a squeegee (it is best to wrap the squeegee with a towel to avoid scratches) 7. Cut off the excess film at the edges 8. Foil and window frame dry with a towel