Description: [Profeional Recording Set] BM-800 Microphone Bundle comes complete with a ton of eential acceories, including condenser microphone, adjustable suspension scior arm stand, table mounting clamp, shock mount, pop filter, 3.5mm male to XLR female cable, sound card/microphone adapter and manual. [Cardioid Polar Pattern] BM-800 cardioid microphone has the most sensitivity at the front and is least sensitive at the back. It isolates from unwanted ambient sound and is much more resistant to feedback than omnidirectional microphones, good for a wide variety of applications, from vocals to room applications, to acoustic instruments. [Noise Cancellation] It features high signal-to-noise ratio (SNR) that means le distortion to be caused on the proce of recording, Unique 2-layer protection system prevents unwanted pop noisesproviding singers with a clear, plosive-free vocal performance. [Fully Compatible] It is fully compatible with Windows 7, Windows 8, Windows 10, Mac OS X computers, as well as several Linux distributions, an ideal mic to capture vocals, acoustic guitars, acoustic pianos and even strings as the condenser is able to take an accurate snapshot and capture all the subtleties and nuances inherent in these instruments. [Widespread Application] The BM-800 is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet profeional voice-over microphone. Specification: Microphone material:steel mesh + zinc alloy tube Frequency response:20 hz-20khz Sensitivity:45 dB 1 db Output impedance:150 30% (1 khz) Load impedance:1000 Equivalent noise level 16 dba Current:3mA Signal to noise ratio:78 decibels Microphone output interface 3.5 mm Cable length:2.5 m Package Including: Style A: 1 x BM-800 condenser microphone 1 x Suspension scior arm 1 x Shock mount 1 x Pop filter 1 x Anti-wind foam cap 1 x Power cable 1 x Iron clip base Style B: 1 x BM-800 condenser microphone 1 x Suspension scior arm 1 x Shock mount 1 x Pop filter 1 x Anti-wind foam cap 1 x Power cable 1 x Iron clip base 1 x V8S sound card Note:Please refer to the picture of the set you choose!! FAQ Q:Is the microphone usable without phantom power? A:Yes.But with a phantom power will be better.It has noise cancelling function. QCan the microphone be used on the phone? AYes, but the sound quality is not good, it is best to use it on computer. QWhat does the package include? A:Depending on which package you buy Q:How many days to arrive from Ruia? A:About 5-15 days. Q:What is the connector on the computer? A3.5 jack Instructions: If the microphone cannot be used to your device, please check if your device has set itself correctly with the microphone. If not, please follow the step to setting it. Step 1: Open your control panel, and click on "sound", a window pops up. Step 2: Select the recording, you will see the microphone is set up or on default. Step 3: Double click the microphone if it is already connected., and then setting your microphone properties. Q1: If the microphone is not working, what should I do? Answer: 1.Unplug the cable to check whether the pins at the bottom of the mic are loosened. 2.Restart computer and re-plug the mic to other port. 3.If the PnP Audio Device appears in the sound settings of computer(below are the methods how to get to sound settings), the mic is able to work. (Windows: Right click speaker icon on right corner of computerRecording Device Mac: Click System PreferencesSoundInput) If not, please email us. We will send you a new cable to replace. If the pins are not loosened, the problem will lie in the connector. Q2: If the mic has hiing what can I do? Answer: The reasons are manifold, were not sure what makes the mic perform bad, though we hope you can try out the suggestions below to see if they can help. 1.Re-plug the cable into the microphone. If the cable gets loose, noise is easily generated or transmiion of signal may run into problem. 2.Reset computer and re-plug microphone into other port. 3.Place it not too close to any power source or computer host. Check whether there's smart-phone near by the cable. 4.Set the on-body control of mic and input/output level of computer at 50%-75%. Volume is the culprit for noise. (Windows: Right click speaker icon on right corner of computerRecording Device/Playback Deviceright click USB PnP Device/default speakerPropertiesLevels. If there's "Microphone Boost", turn it to 0-10dB. Mac: System PreferencesSoundInput/OutputInput Volume/Output Volume) 5.(If using Windows computer,) disable all sound effects. (Right click speaker icon on right corner of computerPlayback Deviceright click the default loudspeakerEnhancementsclick "