Feature: 1. Pure copper core motor, possess high-speed and strong power, energy-saving and power-saving 2. 2000-12000r/min, CW and CCW can be adjusted, the governor can realize 7-speed speed regulation 3. The maximum cutting depth is up to 40mm, and supports angular cutting to meet the needs of daily use 4. One machine support many-purpose, can install drill chuck, sandpaper, polishing wheel, rounding device for different operations 5. The product can hold 16/20MM inner hole saw blades, very practical and useful 6. Can be used for manual DIY, wood, metal, plastic, acrylic, etc. cutting, the upper drill chuck and corresponding accessories can be used for grinding, carving, drilling, etc. Specification: Item Type: Mini Table Saw Material: Aluminum alloy, cold rolled steel, copper Scope of Application: Can be used for manual DIY, wood, metal, plastic, acrylic, etc. cutting, and the upper drill chuck and corresponding accessories can be used for grinding, carving, drilling, etc. Motor Speed: 2000-12000r/min (seven speed regulation) Maximum Cutting Depth: Approx. 40mm / 1.6in Maximum Saw Blade Diameter: Approx. 110mm / 4.3in Suitable for Inner Hole of Saw Blade: Approx. 16mm / 0.6in, 20mm / 0.8in Drill Chuck Shaft Diameter: Approx. 10mm / 0.4in Motor and Spindle Speed Ratio: 1: 3 Power Supply Voltage: DC12-24V Motor Power: 180W (product use power, not product use idling power) CW and CCW: Adjustable Angle Cutting: Support Table Saw Size(LxWxH): Approx. 280 x 200 x 150mm / 11 x 7.9 x 5.9in(after adding dust-proof board and bracket)Saw Blade Parameters: Size: Approx. 110mm / 4.3in Hole Diameter: Approx. 20mm / 0.8in Uses: For wood. Package List: 1 x Table Saw1 x Aluminum Alloy Support (including 2 adjusting screws)1 x Acrylic Dustproof Board2 x Aluminum Alloy Support Screw1 x Angle Square1 x Hex Wrench1 x Brush1 x Saw Blade1 x Power Adapter1 x Plug1 x User Manual Note: 1. The power supply must be cut off to install the saw blade2. The cutting direction and table grinding direction must be operated in accordance with the indicated direction3. To switch the direction, turn off the power first and then reverse the operation4. When using a table saw to cut, remove the accessories of the table grinder. When using a table grinder, be sure to remove the saw blade for use. 5.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.