Item Type: Sheep Shears_x000D_Material: ABS, high carbon steel. _x000D_Power: 1000W_x000D_No Load Speed: 2600RPM_x000D_Wire Length: Approx. 5m / 16.4ft 1High Efficiency: With 1000W high power and 2600RPM high speed, this sheep shears guarantees efficient wool grooming and cutting. 26 Speed Control: Low speeds enable accurate operation in trimming sensitive area, while high speeds suits for full body shaving. 3Incisive Cutter: Adopting high carbon steel material with good hardness, the incisive blade ensures great safety and durability. 4Practical Using: Can be widely applied to sheep, goats, llamas, alpacas and so on, but not for cats, puppies, people, and so on. 5The Working Tip: When using an electric shears, remember to lubricate the blades, also remember that the machine cannot be idling. It is easy to heat up, and please use cooling spray every few minutes as well as taking short breaks during cutting, clean the blade in time, and do not idle to prevent the blade from overheating. 1 x Main Machine 1 x User Manual 1 x Screwdriver 1 x Oil Bottle 1 x Brush 2 x Carbon Brush 1 x Storage Box 1. The electric wool clipper is frictional motion and will naturally generate heat. Can be lubricated and cooled with soapy water. The handle of the portable electric wool shears is hot due to the complex mechanical structure inside, which will generate heat by friction. Lubricating oil should be added frequently. Turn off the switch of the electric wool shears during the shearing interval, and do not run it with no load. So as not to increase the burden on the motor. Regularly proper lubrication is required. _x000D_2. Electric wool shears cannot dry cut. It's recommended that the tip of the blade of the shears should be frequently dipped in soapy water to lubricate the blade and soften the oily sweat on the sheep. Before and during use, add lubricating oil to the oil filling hole.