COMPREHENSIVE VEHICLE COVERAGE Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation. Insert the tire tool and lift the tire bead onto the mounting base. 3. Dismount the sensor: Use a screwdriver to remove the fastening screw and sensor from the valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut to 4.0 Nm using the positioning pin. Attach the sensor body to the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, ensuring the valve is positioned at a 180-degree angle from the separation point. Mount the tire over the rim. SPECIFICATIONS: Replacement Part Number: 529333V100O Color: Black Material: ABS Size: 7.5 x 6.5 x 3.5 cm Package Contents: 1 x Tire Pressure Sensor Note 1: No sensor programming required: The tire pressure sensor is and pre-programmed for your vehicle’s make, model, and year. Activation via scan tool or re-learning procedure is required. Auto relearn process is recommended. TPMS installation should only be performed by trained professionals. The package includes only the items listed above; other products are not included. Note: Lighting and display settings may cause slight color variations between the product image and the actual item. Measurement error allowance is +/- 1-3 cm.