1The foot pressure sensor is composed of a polyester film with excellent comprehensive mechanical properties, a highly conductive material and a nano-scale sensing material. 2The bottom layer is a flexible film and a conductive layer conforming thereto, and the top layer is a flexible film and a pressure-sensitive material compounded thereon 3The bottom and top layers are bonded by double-sided adhesive, and the sensing areas of the upper and lower layers are isolated 4When the sensing area is pressurized, the wires separated from the bottom layer are turned on, and the output resistance of the sensing area changes with the pressure. 5Excellent pressure sensing, quick response and long service life. 6Reasonable human foot mechanics design, excellent waterproof function and low power consumptionItem Type: Film Foot Pressure SensorThickness: 0.4mm Style: Film, flexible Triggering Force: 500g Pressure Range: 0.5-10KG, soft indenter Mode of Pressure Action: Soft touch compression Resistance When not Triggered: Greater than 1M Activation Time: Less than 10ms Operating Temperature: -20 + 65 Durability: 1 million times or more (under normal walking) Resistance Use Range: 50K-150K Response Time: FS-INS-16Z foot pressure sensor is a flexible film pressure sensor with 16 independent sensing areas, and the output resistance of the sensing area changes accordingly with the change of external pressure. Reasonable sensing area layout, the interface has a total of 20 interface lead wire, the interface lead wire uses a 1mm pitch, 10Pin, 0.3mm thickness plug-in interface. There are 2 common wires, 16 independent lead wires in the sensing area, and 2 vacant wires.1 xSensor