4.3inch DSI LCD Touch Display for Raspberry Pi, 800x480 resolution, IPS screen wide angleSupports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4(CM3/3+/4 requires extra adapter board)Supports Raspbian, 5-points touch, driver freeSupports Ubuntu / Kali / WIN10 IoT, single point touch, driver freeSupports Retropie, driver free 1. Capacitive touch panel, support up to 5-point touch2. DSI interface, refresh rate up to 60Hz3. Tempered glass capacitive touch panel, hardness up to 6H4. When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie, driver free.5. Supports software control of backlight brightnessHardware connectionConnect the DSI interface of 4.3inch DSI LCD to the DSI interface of Raspberry Pi.For easy use, you can fix the Raspberry Pi on the backside of the 4.3inch DSI LCD by screwsSoftware settingSupports Raspberry Pi OS / Ubuntu / Kali and Retropie systems for Raspberry Pi.1) Download image from the Raspberry Pi website.2) Download the compressed file to the PC, and unzip it to get the .img file.3) Connect the TF card to the PC, use SDFormatter software to format the TF card.4) Open the Win32DiskImager software, select the system image downloaded in step 2, and click 'Write' to write the system image.5) After the image has finished writing, save, and quit the TF card safely.6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.color:Blue+blackMaterial:PCB Package Contents:1 x 4.3inch DSI LCD1 x FPC 15PIN 1.0 pitch 50mm (opposite sides)1 x Screws pack Only the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed erro