3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V Features: - Suitable for heating water in plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, buckets, and other water-filled containers. - Ensure the water level is at least 25 to 30 cm to allow the heater to be fully submerged and suspended in the water. - The unit is designed to float on the surface; adjust the power cord to position the heater correctly. - If the water level is below 25 cm, ensure the heating element is fully submerged. The heater can be slightly tilted for proper immersion. - For inflatable pools, bathtubs, or containers made of sensitive materials, place a ceramic base under the heating pipe to prevent direct contact and potential damage. - Fill the container with water, place the heater inside, and plug it in. Wait for the indicator light to turn on. Heating begins when small bubbles appear around the heating element. - For large volumes of water, unplug the device halfway through heating to check the temperature. - Once the desired temperature is reached, unplug the power immediately and wait 20 seconds before removing the heater from the water. Specifications: - Type: Electric Water Heater - Model Number: P20250110604 - Power: 3500W - Cable Length: 1.5m - Voltage: 220V, 50Hz - Material: Stainless Steel + PP Plastic Safety Instructions: - The metal heating tube must be completely submerged in water during operation. Never operate the heater outside of water. - Always unplug the device before touching the water. Do not allow human contact with water while the heater is powered. - Unplug the heater before removing it from the water. - The stainless steel heating element must remain fully submerged during use to avoid damage. Package Included: 1 x Immersion Heater (Adaptor included based on destination country)