3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for efficient heating. Suitable for use in plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, buckets, and other water-filled containers. Ensure the water level is at least 25 to 30 cm deep before inserting the heater. The unit will naturally float on the surface; adjust the power cord to keep the heater properly submerged. The heating element must be fully submerged in water during operation to prevent damage. For inflatable pools or bathtubs, place a ceramic tile under the heating pipe to avoid direct contact with the container material. Fill the container with water, insert the heater, and plug it in. Once the indicator light turns on and small bubbles appear around the heating tube, the process begins. For large volumes of water, unplug the unit halfway through heating and check the temperature before continuing. When the desired temperature is reached, unplug the device and wait 20 seconds before removing the heater from the water. Specifications: Type: Electric Water Heater Model Number: Electric Water Heaters Power: 3500W Cable Length: 1.5m Voltage: 220V 50Hz Material: Stainless Steel + PP Plastic Safety Notes: - The metal heating tube must be completely submerged in water during use. - Never use the heater outside of water or while it is dry. - Always unplug the device before touching the water. - Do not allow human contact with water during heating. - Unplug the heater before removing it from the water. - The stainless steel ball portion must remain fully submerged during operation to avoid damage. Package Includes: 1 x Heater Note: The adapter will be provided according to your country's requirements.