Description:Upgrade Variable 8 Colors with Remote Control , One remote control can control multiple lights at the same time.The remote control and each product need to be successfully activated in advance. (Activation method: 1, First charge for at least 5 seconds, 2, Unplug the charging cable, 3, press and hold the red key and dark blue key of the remote control for 1 second at the same time, when the light is on, the activation is successful).Anti Collision Drone Lights for Nightmini strobe light is designed to prevent drones from blind flying at night.360 Visibility from above for Aerial Pilots,that can accurately locate your drone and prevent accidents in the air.Made for Any Drone.8 Color Light Source & 10 Light ModesThe drone led light use selected light beads, Variable 8 colors White, red, green, blue, yellow, violet,pink yellow, ice blue.Bright strobe light makes it easier to follow the drone from a distance and you can easily determine which direction the drone is facing. Long Battery Life and Super LightweightThe drone strobe lights is built-in 110mAh rechargeable lithium battery,charging time is about 1 hours,output up to 9-10 hours at full charge and no worry about running out of power during the flight.Only 6.5g,the lightweight drone lamp won't cause extra burden to the drone.2 Installation Methods and easy to usevelcro installation and rubber ring installation.Method : Mount tape(1. Stick the tape on the drone 2. Stick the drone light on the tape 3. Press and fix the drone) Method : Rubber ring(1. Tie the rubber ring to the left of the drone light 2. The rubber ring goes around the feet of the drone from the left 3. Tie the rubber ring to the right to adjust the position)Item Specifcs:*Product Color: Black*Size:41*26.5*13MM(about)*Built-in Battery: 3.7V 110 mAh,*Light Modes: Variable 8 colors 10 Light Modes*Light Color: Variable 8 colors White, red, green, blue, yellow, violet,pink yellowice blue*Charging Time: 60 min*Waterproof grade:IP65*Remote control:about 7 meters*Use time: The flashing light lasts about 60 hours at high brightness, about 120 hours at medium brightness, and about 200 hours at low brightness, with memory function*Weight: 7.5g* Steps to use the remote control for the first time:(1) Fully charge the Tail light first.(2) Pull out the transparent film of the back cover of the remote control.(3) The Tail light is plugged in and USB charged for 5 seconds and then unplugged to activate the remote control function. (Slightly bright red light when charging, light off when fully charged).(4) Press and hold the red key and dark blue key of the remote control for 1 second at the same time, When the light is on, the product and remote control are activated successfully. (Notes: Activation needs to be completed within 1 minute after unplugging the USB charging plug).(5) If there are N Tail lights, repeat steps (3)-(4) for each light, so that one remote control can control multiple lights at the same time.(Notes: Pull out the transparent film of the back cover of the remote control)Activation failedPlease try the following steps repeatedly:(1) The Tail light is plugged in and USB charged for 5 seconds and then unplugged . (Notes: Activation needs to be completed within 1 minute after unplugging the USB charging plug).(2) Press and hold the red key and dark blue key of the remote control for 1 second at the same timePlease try pressing repeatedlyWhen the light is on, the product and remote control are activated successfully.Note that each light needs to be activated individually using the above method.After all lights are started successfully, press the Switch key on the remote control repeatedly, All lights can be turned on and off at the same time.Precautions:*If the remote control does not operate for more than 60 seconds, it will automatically enter the sleep mode to save power. use it again, you need to long press the remote control button.*When multiple lamps are used, if the mode is not synchronized, Long Press Continuous Light key to make it unified mode, and then switch to other modes.*The light of this product is bright and dazzling, please do not look directly at the lamp beads.*The remote control cannot be used in the charging state, and the light will be automatically turned off within 1 minute in the charging state.*If the tail light is not used for a long time and the battery is exhausted, the white light will flash 4 times after charging, and the remote control needs to be re-paired before use.Package Include:1 Pcs Set or 2 Pcs Set or 4 Pcs or 6 PcsSet1 Remote control(one remote control can control multiple Taillights at the same time)