New Motorcycle Hand Heated Grips Electric Molded Grips Scooter Moped Grips Hand Warmer 22mm Motocross Adjustable Hot Grip Handle Specification: [Product name]: Motorcycle electric heating handlebar [Product packaging]: Color box packaging [Product color]: black [Product material]: Nitrile rubber [Handle length]: Left hand handle: 127mm; Right hand handle: 137mm [Handle diameter]: 22mm [Input voltage]: DC12V [Product power]: 15W-35W adjustable [Handle type]: Sealing or opening electric heating handle [Switch type]: Multi-speed adjustable switch [Applicable models]: 12V motorcycles with handlebar diameter of 22mm [Product advantages]: 112V voltage, 22MM handlebar inner diameter, suitable for most motorcycles 2The product is equipped with a high and low switch, so you can adjust the handle temperature at will. 3Double cable buckle, wider installation range 4Sealable and open-mouth design does not affect the installation of handle plugs on the outside of the handle, making it more beautiful and convenient [Notes]: 1When installing the left hand handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift. 2For models with a balance iron, please adjust the installation position of the balance iron. Do not squeeze the handle when tightening the screws. The balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handle. Excessive squeezing of the handle will cause difficulty in turning the handle switch, and abnormal damage such as the heating wire extruding from the handle face. [Installation instructions]: 1Remove the original handlebar 2Wet the inner hole of the left hand handle with soapy water and do not twist it too much during installation. 3When installing the balance iron on the left hand handle, adjust the position of the balance iron to be slightly separated from the handle. Do not squeeze the handle when tightening the screw. 4If the left hand handle slides on the steel pipe during use, remove the balance iron. 5Power cord, the red wire is connected to the positive pole, the black wire is connected to the negative pole, the temperature cannot be adjusted if reversely connected. 6When installing the left hand handle, the power cord should leave enough room for rotation.