3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for safe and efficient heating. Suitable for use in plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, buckets, and other water-filled containers. To operate, ensure the water level is at least 25 to 30 cm deep so the heater can be fully submerged. The unit will naturally float on the surface; adjust the power cord to position the heater correctly. The heating element must always remain completely submerged during operation to prevent damage. If using with inflatable pools or similar containers, place a ceramic tile under the heating pipe to avoid direct contact with the container material. Fill the container with water, place the heater inside, and plug it in. Once the indicator light turns on and small bubbles appear around the heating element, the unit begins to heat. For large volumes of water, unplug the device halfway through heating to check the temperature. When the desired temperature is reached, unplug the power first, wait 20 seconds, then remove the heater before using the water. Safety instructions: Never touch the water during heating. Always unplug the device before handling the heater or coming into contact with the water. The stainless steel heating element must be fully submerged at all times to avoid malfunction or damage. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Heater (Adapter included according to destination country)