Product description F-type compression crimping tool: Color: red Material: carbon steel and plastic Size: 5.5 inches Compression distance: 0.8 inches Compatibility: RG6 (5C) , RG59 (4C)Basic heavy-duty crimp tool for installing snap seals and F-type connectorsRotary coaxial cable cutter Tools: Material: Carbon Steel and Plastic Length: 4x1x0.7 inchesCompatibility: RG- 58. RG-59, RG-62Dual-blade, coaxial cable stripper Fully adjustable and replaceable blades Removes 0.16, 0.24, 0.32 and 0.47 inches of insulation (adjustable) Easy to use, lock tool on cable, turn clockwise, and pull off unnecessary sections Fitted Has screwdriverInstructions:1. Insert the stripped cable into the connector and make sure the cable is inserted into the end< /p> 2. Place the connector with the cable into the tool holder 3. Squeeze the handle 4. Remove the crimped connection from the tool DeviceNote: If you need clarification, please contact usProduct list:< /p> 1 x terminal crimper 1x wire stripper 20 x F-type connectorInformation provided by the manufacturer4. For stripping round networking cable: a. Insert the cable into the second stripping hole, rotate 1-3 times at counter clockwise, and then open the jaw and remove the outer jacket. b. The black color adjusting knob is for adjusting the blade's depth. Turn clockwise for increasing the blade's depth and counter clockwise for reducing the depth.5.For cutting coaxial cable, round networking cable or flat telephone cable, place the cable in position and then squeeze the handles. 6.For stripping flat cable, insert the cable between the stripper blades. Squeeze handles, cable must be kept perpendicular and then pull from the tool. a.Insert 4p /6p cable into the two-bladed side of the tool's stripper until it touches the stop guide. b.Insert 8p cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade.1.Push the cassette out of the housing, push from the front of the cassette. 2.Cassette is reversible, one side is available for RG-59/6 and another side is for RG-7/11. < /p>3.For stripping coaxial cable: a.Insert the cable until it aligns with the cable guide. b.Insert your index finger into the stripper's finger ring, rotate the stripper by counter clockwise 3-5 times. The cable insulation is cut while you are turning the stripper. c.Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor. d.Stripping distance is designed for 6mm, for each dielectric and inner conductor.F-Type Compression Crimping Tool:Material: Carbon Steel and PlasticSize: 5. 5InchCompressed Distance: 0 . 8InchCompatible: RG6 (5C), RG59 (4C)Essential heavy duty crimping tool for fitting snap-seal and F type connectors Rotary Coaxial Cable Cutter Tool:Material: Carbon Steel and PlasticLength: 4x1x0. 7Inch Compatible: RG-58, RG-59, RG-62; Double blades, coax cable stripperRemoves 0. 16, 0. 24, 0. 32 and 0. 47Inch Insulation (adjustable) Use easily, lock the tool over the cable, spin clockwise, then pull off the unwanted portion Comes with a screw driver How to use: 1. Insert the stripped cable into the connector and make sure the cable is inserted to the end 2. Place connector with cable into the tool's holder 3. Squeeze handles 4. Remove the crimped connector from the tool Package Included: 1 x Wire Terminal Crimper; 1x Wire Stripper 20 x F-Type Connector