Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L )

٣٨٩٫٠٠ د.إ.‏
والشحن مجاناً

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L )

  • العلامة التجارية: Unbranded

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90L )

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٤٣٩٫٠٠ د.إ.‏
السعر: ٣٨٩٫٠٠ د.إ.‏
أنت توفر: ٥٠٫٠٠ د.إ.‏ (11%)
البائع:
٣٨٩٫٠٠ د.إ.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Features 1、This is a double‑acting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s. 2、The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work. 3、The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder. 4、The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments. 5、The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes. Specification Condition: 100% Brand New Item Type: Cylinder Material: Aluminum Alloy Color: As Pictures Shown Optional Type: ACK63-90R, ACK63-90L Inner Diameter: Approx. 63mm / 2.5in Piston Rod Outer Diameter: Approx. 20mm / 0.8in Action Type: Double Action Working Medium: Air (filtered by a Filter Screen Above 40μm) Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi) Guaranteed Pressure Resistance: 1.5MPa (215psi) Working Temperature (℃): -20-80 Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s Travel Tolerance Range: 1.0 Rotation Angle Tolerance Range: Approx. ±1.5° Buffer Type: None Take over Caliber: PT1/8 Installation and Use 1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke. 2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece. 3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder. 4. The medium used in the cylinder should be filtered by a filter element above 40μm before use. 5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod. Package List 1 x Cylinder
  • هوية Fruugo: 330916547-730084744
  • EAN: 9308869049972

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: مجاناً - التسليم بين الأربعاء 22 أكتوبر 2025 – الثلاثاء 28 أكتوبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة